To access the specifaction .PDF on each product, please Click on a PDF Icons provided.
EC-100 DG
- ELASTOMERIC - CRACK
BRIDGING
- WATERPROOF MEMBRANE
- HEAT REFLECTIVE
- DIRT RESISTANT
- LOW V.O.C
- BCA APPROVED
SECTION J
- Concrete deck roofing – Under coat – 1 coat Epitec
- Ply deck roofing – Under coat - 1 coat Epitec
- Metal roofing – Under coat – 1 coat B16 or AC-3
- Cement tile roofing – Under coat – 1 coat Multiseal
- Asbestos roofing – Under coat – 1 coat Barrier, 2 coats Rivett
- Balcony membrane systems – Under coat – 1 coat Epitec
Drying Time @ 25°C
[@ 100 mic W.F.T.]
Re-coat Time @ 25°C
Recommended Thinners
Wash Up
Spread Rate at Recommended DFT
[@ 350 mic D.F.T.]
Spread Rate at Recommended DFT
[@ 192 mic D.F.T.]
Theoretical Spread Rate
[@ 30 microns Dry]
45 minutes
[dry & block resistant]
1 to 2 hours
Water [Thinning not
recommended]
Water
1.37m2/Ltr
[Waterproofing Low Slope]
2.5m2/Ltr
[Waterproofing Steep Slope]
16.00m2/Ltr
METALFLEX
- HEAT REFLECTIVE
- DIRT RESISTANT
- LOW V.O.C
- BCA APPROVED - SECTION J
- OUTSTANDING BOND TO
PRIMED METAL SUBSTRATES
- Correctly prepared and primed, new or aged painted metal roofing – under coat – B16 or AC3
DGIR ELASTIC
- ELASTOMERIC - CRACK
BRIDGING
- WATERPROOF MEMBRANE
- HEAT REFLECTIVE
- DIRT RESISTANT
- LOW V.O.C
- BCA APPROVED - SECTION J
- Masonry, rendered walls & concrete
under coat - Triple Flex 3 in 1
- Pre-cast walls – under coat - Triple Flex Gold 3 in 1
- Trowel on Textured finish walls
under coat - Triple Flex 3 in 1
- Block masonry walls – under coat - Triple Flex 3 in 1
- Brick Walls – under coat - Triple Flex 3 in 1
- Fibre Cement Board – under coat - Triple Flex 3 in 1
Drying Time @ 25°C
[@ 200 mic W.F.T.]
Re-coat Time @ 25°C
Recommended Thinners
Wash Up
Spread Rate at Recommended DFT
[@ 350 mic D.F.T.]
Spread Rate at Recommended DFT
[@ 180 mic D.F.T.]
Theoretical Spread Rate
[@ 30 microns Dry]
45 minutes
[touch dry]
1 to 2 hours
Water [Thinning not
recommended]
Water
1.29m2/Ltr
2.5m2/Ltr
15.00m2/Ltr
EC2000
- ELASTOMERIC - CRACK BRIDGING
- WATERPROOF MEMBRANE
- DIRT RESISTANT
- LOW V.O.C
- Texture Coatings - Under coat - None
- Cement or Acrylic render - Undercoat - 1 coat Tripleflex 3 in 1
- Tilt up panels - Under coat - Tripleflex Gold
- Tilt up panels previously painted - Under coat - None (test
patch first, if delamination is present after 48 hours from test
patch, then apply 1 coat Tripleflex 3 in 1)
- Precast panels - Under coat - same as Tilt up panels
- Texture coating previously painted - Undercoat - None (test
patch first, if delamination is present after 48 hours from test
patch, then apply 1 coat Tripleflex 3 in 1)
Drying Time @ 25°C
Re-coat Time @ 25°C
Recommended Thinners
Recommended DFT
Theoretical Spread Rate
[@ 350 mic D.F.T.]
30 minutes
4 hours
Water
350 microns dry
2.5m2/Ltr
[including two coats]
SUNTUFF
- LOW V.O.C
- NON-SPLATTER
- RESISTANCE TO DIRT PICK-UP
- EASY WASH DOWN
- Timber - Under coat - 1 coat Tripleflex
- Texture coating - Under coat - None
- Cement or acrylic render - Under coat - Tripleflex
Recommended Thinners
Touch Dry
Drying Time @ 25°C, 50% RH
Theoretical Spread Rate
[@ 30 microns Dry]
Water
30 minutes
2 hours
10.0m2/Ltr
SUMOLAC - PART A & PART B
ANTI-GRAFFITI WALL COATING
- REPEL & RESISTANCE OF GRAFFITI
- LONG-TERM PROTECTION
- EXCELLENT U.V. STABILITY
- EASY WASH DOWN
- Any substrate coated with suntuff
Please refer to Technical Bulletin
COOLPAVE
- HEAT REFLECTIVE
- TOLERANT TO CHEMICALS
FROM VECHICLE ENGINES,
TRANSMISSIONS & BREAK
SYSTEMS
- LOW V.O.C
- BCA APPROVED - SECTION J
- NON SKID
- Asphalt – Car park – under coat - Epitec
- Workshop floor – under coat - Epitec
- Factory floor – under coat - Epitec
- Garage floor – under coat - Epitec
- Concrete patio / Veranda floors – under coat - Epitec
- Swimming pool surrounds – under coat - Epitec
- Commercial Kitchen floors – under coat - Epitec
Drying Time @ 25°C
[@ 100 mic W.F.T.]
Re-coat Time @ 25°C
Recommended Thinners
Wash Up
Spread Rate at Recommended DFT
[@ 184 mic D.F.T.]
Theoretical Spread Rate
[@ 30 microns Dry]
45 minutes
[dry and block resistant]
1 to 2 hours
Water [Thinning not
recommended]
Water
3.0m2/Ltr
18.33m2/Ltr
SPORTS COAT
- HEAT REFLECTIVE
- HARD WEARING
- BCA APPROVED - SECTION J
- NON SKID
- Concrete Tennis courts – under coat - Epitec
- Balcony Decks – under coat - Epitec
- Hotel walk ways – under coat - Epitec
- Bike paths – under coat - Epitec
Please refer to Technical Bulletin
EPITEC PRIMER - PART A & B
- HIGH TRAFFIC AREAS
- WATER RESISTANCE
- HYDROSTATIC PRESSURE
RESISTANCE PSI 50-60
- LOW V.O.C
- NO DETERRATION & RESISTANCE
TO MOST CHEMICALS
- UV RESISTANT
- Concrete flooring - Undercoat - 1 coat Epitec primer
Drying Time @ 25°C
(Touch Dry)
(Dry)
Re-coat Time @ 25°C
Recommended Thinners
Pot Life
1 to 3 hours
12 to 24 hours
12 to 24 hours
[Minimum to Maximum]
Should not be required,
however up to 10% Water
can be used.
1 to 2 hours maximum
ULTIMATE SERIES
- WASHABLE
- LONG LASTING FINISH
- HIDING POWER
- FREEDOM FROM ROLLER SPLATTER
- LOW V.O.C
- LOW SHEEN, MATT & SATIN
- New Gyprock - Under coat - 1 coat Ultimate Series
APU GOLD
- Previously painted Surfaces - Under coat - None
- New Render - Under coat - 1 coat Ultimate Series APU
Recommended Thinners
Touch Dry
Dry @ 25°C, 50% RH
Theoretical Spread Rate
[@ 30 mic D.F.T.]
Water
30 minutes
2 hours
11.59m2/Ltr
ULTIMATE SERIES - CEILING
- GREAT IMPERFECTION COVERAGE
- LONG LASTING FINISH
- HIDING POWER
- FREEDOM FROM ROLLER SPLATTER
- LOW V.O.C
- New Gyprock - Under coat - 1 coat Ultimate Series APU GOLD
- Previously painted Surfaces - Undercoat - None or
Multseal where stain is visible (Multiseal over stain only)
Recommended Thinners
Wash Up
Touch Dry
Dry @ 25°C, 50% RH
Theoretical Spread Rate
[@ 30 mic D.F.T.]
Water
Water
30 minutes
2 hours
14 to 16m2/Ltr
BATHROOM TUFF
- MOULD RESISTANT
- HIGHLY WASHABLE
- HIGH BONDING AGENT
- RESISTANCE TO DIRT PICK -UP
- FREEDOM FROM ROLLER
SPLATTER
- LOW V.O.C
- LOW SHEEN & SEMI GLOSS
- New Gyprock - Under coat - 1 coat Ultimate Series APU
- Previously painted Surfaces - Undercoat - None
Recommended Thinners
Touch Dry
Dry @ 25°C, 50% RH
Theoretical Spread Rate
[@ 30 mic D.F.T.]
Water
30 minutes
2 hours
12.08m2/Ltr
< SATIN ENAMEL
- LOW ODOUR
- EXCELLENT SPREAD RATE
- HIGH BONDING AGENT
- RESISTANCE TO DIRT PICK -UP
- LOW V.O.C
- New Timber - Under coat - 1 coat Oil base undercoat quick dry
- Timber previously painted - Undercoat - None
Recommended Thinners
Touch Dry @ 25°C
Dry @ 25°C
Recoat Time @ 25°C
Wash Up
Theoretical Spread Rate
[@ 30 mic D.F.T.]
Mineral Turpentine
2 to 4 hours
12 hours
8 hours
Mineral Turpentine
18m2 / Ltr
POLYESTER
- RESISTANT TO HOT LIQUIDS
- EXTREMELY HARD WEARING
- RESISTANT TO HOUSEHOLD
CHEMICALS
- AVAILABLE IN MATT & SATIN
- New timber flooring – Under coat – 2 coats polyester sealer (light sand between coats)
- Old timber flooring - Under coat - 2 coats polyester sealer (light sand between coats) prior sand all existing coating
Recommended Thinners
(only for spray application)
Touch Dry @ 25°C
Recoat Time @ 25°C
Wash Up
Theoretical Spread Rate
[@ 30 mic D.F.T.]
Mineral Turpentine
2 to 3 hours
8 to 24 hours
Mineral Turpentine
14 to 16m2 / Ltr
Substrate Dependent
URETEC - R
- TIMBER & CONCRETE FLOORS
- TOUGH AND DURABLE
- RESISTANT TO INDUSTRIAL
CHEMICALS
- MOISTURE CURING
POLYURETHANE
- RAPID DRY TIME
- Timber flooring - Under coat - 1 coat of Uretec-RP
- Concrete flooring - Under coat - 1 coat of Uretec-RP
Curing Times
- Hard Dry
- Ready For Use
- Fully Cured
Recoat Time @ 25°C, 55% RH
Theoretical Spread Rate
[per coat on Metal]
[per coat on Flat Concrete]
Recommended Thinners
3 to 4 hours
12 to 24 hours
3 to 7 days
3 to 4 hours
5m2 / Ltr
5m2 / Ltr
Astec Brush’n’Roller Wash
PDF Download
EC100 - Technical Bulletin
PDF Download
Metalflex - Technical Bulletin
Our proven flawless track record provides confidence to DIY and trade applicators. We manufacture a premium range of interior / exterior acrylic wall products for the domestic and commercial markets. We also specialise in industrial primers, strippers, rust treatments, exterior skim coats, texture finishes, elastomeric membranes and energy star coatings.
Drying Time @ 25°C
[@ 100 mic W.F.T.]
Re-coat Time @ 25°C
Recommended Thinners
Wash Up
Spread Rate at Recommended DFT
[@ 150 mic D.F.T.]
Theoretical Spread Rate
[@ 30 microns Dry]
35 minutes
[dry & block resistant]
1 to 2 hours
Water [Thinning not
recommended]
Water
2.5m2/Ltr
[inc. two coats & profile]
12.67m2/Ltr
PDF Download
DGIR Elastic - Technical Bulletin
PDF Download
EC2000 - Technical Bulletin
PDF Download
Suntuff - Technical Bulletin
PDF Download
Sumolac - Technical Bulletin
PDF Download
Coolpave - Technical Bulletin
PDF Download
Sports Coat - Technical Bulletin
PDF Download
Epitec Primer - Part A & B- Technical Bulletin
PDF Download
Ultimate Series - Technical Bulletin
PDF Download
U/S Ceiling - Technical Bulletin
PDF Download
Bathroom Tuff - Technical Bulletin
PDF Download
Satin Enamel - Technical Bulletin
PDF Download
Polyester - Technical Bulletin
PDF Download
Uretec R - Technical Bulletin
PASTINA
TUSCANY
LIGHT STONE
Recommended Thinners
Touch Dry
Dry @ 25°C, 50% RH
Theoretical Spread Rate
[@ 900 mic D.F.T.]
Abrasion Resistance
Water
1 hour
2 hours
1.0m2/LTR
Excellent
Water
1 hour
2 hours
1.0m2/LTR
Excellent
Water
1 hour
2 hours
1.25m2/LTR
Excellent
To view our complete palette of textures, please contact us on (02) 9517 9001 or come visit us at our Marrickville outlet.
PDF Download
Pastina - Technical Bulletin
PDF Download
Tuscany - Technical Bulletin
PDF Download
Light Stone - Technical Bulletin
Pack Size
Mix Activation Water
Drying Time @ 25°C
[55% Relative Humidity]
Recommended Thinners
Wash Up
Re-Coat Time @ 25°C
Minimum Application Temperature
Finish Colour
Durability
Curing
EZY-FLOAT MARBLE RENDER
- RESISTANCE TO - WATER,
EFFLORESCENCE OR RISING DAMP.
- TOUGH AND DURABLE
- FLEXIBLE
- MINIMAL TO NO DRYING SHRINKAGE
- INSULATING
- BONDS TO MOST MINERAL AND NEW
CONSTRUCTION SURFACES
EZY-FLOAT ROTOR RENDER
- RESISTANCE TO - WATER,
EFFLORESCENCE OR RISING DAMP
- TOUGH AND DURABLE
- FLEXIBLE
- MINIMAL TO NO DRYING SHRINKAGE
- BONDS TO MOST MINERAL AND NEW
CONSTRUCTION SURFACES
20kg Paper Sack
[13kg Volume Fill]
3.3 to 3.6 litres per bag
8 hours [Will vary with
changes in temperature,
humidity and residual
substrate moisture]
Water
Water
2 to 4 hours
5°C
Light Grey
Exterior / Interior
[Must Be Top-Coated]
Not Required
20kg Paper Sack
3.6 to 4.0 litres per bag
8 hours [Will vary with
changes in temperature,
humidity and residual
substrate moisture]
Water
Water
2 to 4 hours
5°C
Light Grey
Exterior / Interior
[Must Be Top-Coated]
Not Required
Pack Size
Mix Activation Water
Drying Time @ 25°C
[55% Relative Humidity]
Recommended Thinners
Wash Up
Re-Coat Time @ 25°C
Minimum Application Temperature
Finish Colour
Durability
Curing
PDF Download
Ezy-Float Rotor Render - Technical Bulletin
PDF Download
Ezy-Float Marble Render - Technical Bulletin
ARMATEX HIGH BUILD
- RESISTANCE TO WATER
- CAPACITY OF 15MM BUILD UP PER COAT
- TOUGH AND DURABLE
- FLEXIBLE
- EXTREMELY STRONG BOND TO
SUBSTRATE
- EXCELLENT IMPACT RESISTANCE
ARMATEX PREPATCH
- 100% ACRYLIC
- TOUGH AND DURABLE
- PERFECT FOR LEVELING OVER
JOINTS
- MINIMAL DRYING SHRINKAGE
DURING CURE
- STRONG BONDING
- FLEXIBLE
Recommended Thinners
Touch Dry @ 25°C, 50% RH
Handle @ 25°C, 50% RH
Dry @ 25°C, 50% RH
Theoretical Spread Rate
[@ 900 mic D.F.T.]
Abrasion Resistance
Impact Resistance
Solvent Resistance
[Full Top Coated System]
Alcohol
Salt Water
Distilled Water
Diluted Caustic Soda
Detergent Solution
Dilute 5% Mineral Acid
Water
1 hour
2 hours
24 hours
1.1m2/Ltr
Excellent
Excellent
No Reaction
No Reaction
No Reaction
No Reaction
No Reaction
No Reaction
PDF Download
Armatex High build - Technical Bulletin
PDF Download
Armatex Prepatch Coarse - Technical Bulletin
AVAILABLE IN ONLY 200 LITRE DRUMS
Recommended Thinners
Touch Dry @ 25°C, 50% RH
Handle @ 25°C, 50% RH
Dry @ 25°C, 50% RH
Theoretical Spread Rate
[@ 2000 mic D.F.T.]
Abrasion Resistance
Impact Resistance
Solvent Resistance
[Full Top Coated System]
Alcohol
Salt Water
Distilled Water
Diluted Caustic Soda
Detergent Solution
Dilute 5% Mineral Acid
Water
1 hour
2 hours
24 hours
0.45m2/Ltr
Excellent
Very High
No Reaction
No Reaction
No Reaction
No Reaction
No Reaction
No Reaction